Defect Codes - SSANGYONG 1999 Musso Service Manual

DEFECT CODES

Defect Code
Normal
01
02 Defective ECU
Front/left Wheel Speed
03
Sensor (Wire)
Front/right Wheel Speed
04
Sensor (Wire)
Rear/left Wheel Speed
05
Sensor (Wire)
06 Rear/right Wheel Speed
Sensor (Wire)
Front/left Wheel Speed
07
Sensor (Signal)
08 Front/right Wheel Speed
Sensor (Signal)
Application
ANTILOCK BRAKE SYSTEM 4F-13
Description
-
Replace the ECU
Check resistance of the wheel speed sensor :
1.280KW - 1.920KW
Check wire for ground and open.
Replace the sensor.
Check resistance of the wheel speed sensor :
1.280KW - 1.920KW
Check wire for ground and open.
Replace the sensor.
Check resistance of the wheel speed sensor :
1.280KW - 1.920KW
Check wire for ground and open.
Replace the sensor.
Check resistance of the wheel speed sensor :
1.280KW - 1.920KW
Check wire for ground and open.
Replace the sensor.
Check wire for ground and open.
Check connection of the wheel speed sensor connec-
tor and ECU side connector.
Measure air gap between wheel teeth and wheel speed
sensor and check installation of wheel tooth.
(Standard air gap : 0.35 - 1.60 mm)
Check output voltage of the sensor by rotating the
wheel 1/2 - 1 revolution per second and shaking sen-
sor wire.
- When measured by multi - meter (AC) :
output voltage > 70 mV
- When measured in oscilloscope :
output voltage ³ 120 mV/P-P
Replace the sensor.
Check wire for ground and open.
Check connection of the wheel speed sensor. con-
nector and ECU side connector.
Measure the air gap between wheel teeth and wheel
speed sensor and check installation of wheel tooth.
(Standard air gap : 0.35 - 1.60 mm)
Check output voltage of the sensor by rotating the
wheel 1/2 - 1 revolution per second and shaking sen-
sor wire.