Valve Stem Seal - SSANGYONG 1999 Musso Service Manual

VALVE STEM SEAL

Preceding Work : Removal of valve spring
Tools Required
104 589 00 37 00 Pliers
119 589 00 43 00 Drift
Replacement Procedure
1. Remove the valve stem seal (2) using the pliers.
Notice
Check the valve stem seal for damage and replace if
necessary.
2. Coat the valve stem seal with oil and assemble it with the
protective sleeve.
3. Insert the valve stem seal by pressing it with the drift.
Pliers 104 589 00 37 00
Drift 119 589 00 43 00
M162 ENGINE MECHANICAL 1B1-71
1 Drift (Special Tool)
2 Valve Stem Seal
3 Protective Sleeve