Cylinder Head Mating Surface - SSANGYONG 1999 Musso Service Manual

CYLINDER HEAD MATING SURFACE

Preceding Work : Removal of valves
Service Data Standard
Overall Height of Cylinder Head
Minimum Height After Machining
Flatness
Distance 'T'
(Between Camshaft Bearing
and Valve Stem)
Notice
Do not exceed 0.4mm for the milling of the mating surface of crankcase and cylinder head.
M162 ENGINE MECHANICAL 1B1-115
Axial Direction
Transverse Direction
Standard Size
Repair Size
135.9 - 136.0 mm
135.5 mm
0.08 mm
0.0 mm
24.21 - 24.75 mm
Intake
Exhaust 22.21 - 22.75 mm
23.96 - 24.51 mm
Intake
Exhaust 21.96 - 22.51 mm