Oil Gallery In Cylinder Head - SSANGYONG 1999 Musso Service Manual

1B1-106 M162 ENGINE MECHANICAL

OIL GALLERY IN CYLINDER HEAD

Preceding Work : Removal of cylinder head
Removal of camshaft
Removal of tappet
1 Screw Plug ................................................ 15 Nm
2 Seal
Cleaning Procedure
1. Remove the screw plug (1) and the seal (2).
Installation Notice
Tightening Torque
Replace the seal with new one.
2. Clean the oil gallery using the compressed air.
3 Steel Ball ( f 8mm)
15 Nm