SSANGYONG 1999 Musso Service Manual page 877

Removal & Installation Procedure
1. Remove the tire.
Installation Notice
Tightening Torque
2. Remove the autolocking hub vacuum hose.
3. With ABS
Remove the wheel speed sensor from the steering knuckle.
Installation Notice
Tightening Torque
4. Remove the mounting bolts and pull off the caliper assembly.
Installation Notice
Tightening Torque
Notice
Be careful not to damage the brake hose.
Steel Wheel 80 - 120 Nm
Aluminum Wheel 110 - 130 Nm
6 - 8 Nm
Hose Bolt 25 - 35 Nm
Mounting Bolt 85 - 105 Nm
FRONT DRIVE AXLE 3A-9