Oil Pan - SSANGYONG 1999 Musso Service Manual

OIL PAN

1 Gasket ................................................... Replace
2 Bolt (M6 x 22, 6 pieces) ............................ 10 Nm
3 Drain Plug (M6 x 20) ................................. 25 Nm
4 Bolt (M6 x 20, 22 pieces) .......................... 10 Nm
Removal & Installation Procedure
1. Remove the drain plug and drain the oil completely.
2. Disconnect the electric connector from oil level switch.
3. Unscrew the bolts (10) for oil level switch and check the O-
ring (11) for wear or damage. And replace it if necessary.
4. Unscrew the bolts and remove the oil pan and gasket.
Notice
Arrange the bolts according to each size.
5. Clean the inside of oil pan and sealing surface, then apply
the sealant.
6. Replace the gasket with new one.
7. Install the oil pan with gasket, and tighten each bolt in
specified torque.
8. Check for oil leaks while running the engine.
M162 ENGINE MECHANICAL 1B1-93
5 Bolt (M6 x 85) ............................................ 10 Nm
6 Bolt (M8 x 40) ............................................ 25 Nm
7 Bolt (M10) ................................................. 40 Nm
8 Oil Pan
M8 X 40, 4 pieces
M6 X 85, 3 pieces
M6 X 35, 3 pieces
the rest M6 X 20, 28 pieces