6-2. Unscrew the bolts and remove hub flange.
Installation Notice
Tightening Torque
Before installation, apply loctite on the mating surface.
7.
Remove the hub nut with special tool.
Tightening Torque
8.
Remove the hub and disk assembly.
9.
Remove the disk brake dust shield.
Installation Notice
Tightening Torque
70 - 90 Nm
15 Nm
4 - 6 Nm
FRONT DRIVE AXLE 3A-11
Need help?
Do you have a question about the 1999 Musso and is the answer not in the manual?