Maintenance And Repair; On-Vehicle Service; 2B-6 Wheel Alignment - SSANGYONG 1999 Musso Service Manual

2B-6 WHEEL ALIGNMENT

MAINTENANCE AND REPAIR

ON VEHICLE SERVICE
WHEEL ALIGNMENT
Vehicle Height
1. Check the tire for proper inflation.
2. Measure 'A' from the center of the lower arm rear mounting
bolt end to the ground.
3. Measure 'B' from the center of the steering knuckle shaft to
the ground.
4. If the difference between 'A' and 'B' is not within specification,
adjust vehicle height using torsion bar height control bolt.
'B' - 'A'
Notice
Before wheel alignment, adjust vehicle height first.
Toe-in
1. Measure toe-in.
Specification
2. If toe-in is not within specification, loosen the tie rod nuts
and adjust it by turning the tie rod.
31 - 36mm
0 - 4mm