Maintenance And Repair; On-Vehicle Service; Alternator - SSANGYONG 1999 Musso Service Manual

1E2-4 M161 ENGINE ELECTRICAL

ALTERNATOR

Preceding Work : Removal of the drivebelt
Removal & Installation Procedure
1. Disconnect the negative battery terminal.
2. Unscrew the nut and disconnect the terminal (1).
Installation Notice
Tightening Torque
3. Unscrew the nut and disconnect the terminal (2).
Installation Notice
Tightening Torque
4. Unscrew the combination bolt (3).
Installation Notice
Tightening Torque
5. Remove the alternator.
6. Installation should follow the removal procedure in the
reverse order.

MAINTENANCE AND REPAIR

ON-VEHICLE SERVICE

14 - 18 Nm
4 - 5 Nm
42 - 50 Nm
1 Terminal (B+)
2 Terminal (D+)
3 Combination Bolt
4 Alternator