SSANGYONG 1999 Musso Service Manual page 538

Removal & Installation Procedure
1. Drain the coolant completely.
2. Disconnect the coolant hose(4) from the thermostat housing
cover(3).
3. Remove the bolts(5) and then remove the thermostat(1)
and housing cover(3)
Installation Notice
Align the groove on thermostat and the housing cover
rib(arrow).
Tightening Torque
Notice
Replace the seal(2).
4. Installation should follow the removal procedure in the
reverse order.
10 Nm
OM600 ENGINE COOLING 1D3-17