SSANGYONG 1999 Musso Service Manual page 455

Tools Required
115 589 02 34 00 Sliding Hammer
116 589 20 33 00 Threaded Pin
Removal Procedure
1. Removal the cylinder head cover.
2. Pull off the tensioning lever (7) and remove from the spring
(15).
3. Pry off the closing cover (14) and remove the bolt (13) and
then remove the guide pulley (12).
4. Place alignment marks (arrow) on the timing chain (16) and
camshaft sprocket (4).
5. Remove the camshaft sprocket.
OM600 ENGINE MECHANICAL 1B3-153