SSANGYONG 1999 Musso Service Manual page 178

1 Plug ....................................................... Replace
2 Main Oil Gallery
Tools Required
102 589 12 15 00 Drift
Sealing Procedure
1. Enlarge the end of main oil gallery (4) to be diameter of
16mm, depth of 15mm.
2. Using an M16 x 1.5 thread (tap), make the thread at the
end of main oil gallery (4).
3. Throughly clean the oil gallery with compressed air and
tighten the screw plug (M16 x 1.5) after applying sealing
bond on it.
4. Apply Loctite 270 on new plug and tighten to the hole until
the drift is stopped after inserting new plug into the drift.
M162 ENGINE MECHANICAL 1B1-105
3 Screw Plug