1B2-30 M161 ENGINE MECHANICAL
TENSIONING DEVICE
Preceding Work : Removal of tensioning device shock absorber
1 Bolt (M8 x 75, 2 pieces) +
Washer .......................................... 22.5-27.5 Nm
2 Bolt (M8 x 25, 1 pieces) +
Washer .......................................... 22.5-27.5 Nm
Removal & Installation Procedure
1. Turn the stud bolt to counterclockwise.
2. Insert the pin (111 589 01 15 00) into the hole in tensioning
arm.
3. Unscrew the bolts (1, 2) and remove the tensioning device.
Installation Notice
Tightening Torque
4. Installation should follow the removal procedure in the
reverse order.
3 Tensioning Device
4 Stud bolt
5 Tensioning Arm
22.5 - 27.5 Nm