SSANGYONG 1999 Musso Service Manual page 783

Removal & Installation Procedure
1. Release the clamp securing HFM sensor and air cleaner.
2. Disengage the air cleaner assembly and HFM sensor
assembly.
3. Unserew the mounting bolt(6) from the bracket.
Installation Notice
Tightening Torque
4. Release the clamp from air cleaner assembly housing and
remove the cover.
5. Remove the air cleaner assembly.
6. Remove the air cleaner housing from insulator.
Notice
Make sure the air cleaner to be seated in insulator.
7. Disengage the air duct hose and air cleaner housing and
remove the housing.
8. Remove the air duct hose.
9. Unscrew the two bolts(7) from air inlet duct.
Installation Notice
Tightening Torque
10. Remove the air inlet duct.
11. Installation should follow the removal procedure in the
reverse order.
M162 ENGINE INTAKE & EXHAUST 1G1-3
22.5 - 27.5 Nm
8 - 9 Nm