SSANGYONG 1999 Musso Service Manual page 1064

Transmission Case
To teardown the transmission case, proceed as follows:
1. Remove the pin from the cross shaft inhibitor switch side
(4WD models) using tool No.0555-332942.
2. Remove the inhibitor switch from the case.
Remove the cross shaft seals with special tool No.0555-
331893.
3. Remove the circlip from the cross-shaft. Pull the shaft to
release the drive pin from the selector quadrant.
4. Using tool No. 0555-331897, press the pin from the cross-
shaft and withdraw the shaft from the case. Retrieve the
spring and pin
5. Remove the manual valve lever and the park rod.
6. Remove the 10 pin plug from the wiring loom bracket
adjacent to the inhibitor switch(RWD models),
7. Depress the tangs and withdraw the 10 pin connector from
the case. Remove the loom assembly.
AUTOMATIC TRANSMISSION 5A-87