Tensioning Rail - SSANGYONG 1999 Musso Service Manual

1B1-80 M162 ENGINE MECHANICAL

TENSIONING RAIL

Preceding Work : Removal of timing gear case cover
Removal & Installation Procedure
1. Put the assembly mark at the camshaft sprocket and the
timing chain with the paint (arrow).
2. Remove the exhaust camshaft sprocket.
3. Remove the tensioning rail (1) from the tensioning rail pin
(3).
Notice
Replace the plastic guide (2) if it is damaged.
For installation, exactly align the plastic guide (2) with
the tensioning rail (1).
4. Installation should follow the removal procedure in the
reverse order.
5. Check the camshaft timing position.
1 Tensioning Rail
2 Plastic Guide
3 Tensioning Rail Pin
4 Guide Rail