Crankcase Mating Surface - SSANGYONG 1999 Musso Service Manual

CRANKCASE MATING SURFACE

Service Data Standard
Height of The Crankcase "H" (When new)
Minimum Height After Milling
Flatness
Permissible Deviation of Parallelism of The
Upper to Lower Mating Surface
Peak-to-valley Height
M162 ENGINE MECHANICAL 1B1-113
Crankcase Upper Mating Surface
Crankcase Lower Mating Surface
Axial Direction
Transverse Direction
Crankcase Upper Mating Surface
Crankcase Lower Mating Surface
282.25 - 282.35mm
281.95mm
0.03mm
0.04mm
0.1mm
0.05mm
0.005 - 0.020mm
0.025mm