Thermostat - SSANGYONG 1999 Musso Service Manual

1D1-10 M162 ENGINE COOLING

THERMOSTAT

1 Thermostat Cover
2 Thermostat
3 O-ring
4 Thermostat Cover Bracket
Removal & Installation Procedure
1. Drain the coolant from the radiator.
2. Loosen the hose mounting clamp (6) and remove the heater
hose (7).
3. Unscrew the three bolts (5) and remove the thermostat cover
bracket, thermostat cover and the thermostat in order.
Installation Notice
Tightening Torque
Do not separate the thermostat cover and thermostat.
4. Replace the O-ring if necessary.
5. Check the leakage in the cooling system.
5 Bolt (M6 X 25, 3 pieces) ......................... 9-11 Nm
6 Hose Mounting Clamp
7 Heater Hose
9 - 11 Nm