RESONANCE FLAP
1 Soft Cap (2)
2 Bolt (M6 x 25, 4 pieces) ......................... 9-11 Nm
3 O-ring
Removal & Installation Procedure
1. Remove the 2 soft caps (1).
2. Remove the upper resonance flap coupling after removing
4 bolts (2).
Notice
Connect carefully the vacuum hose (4) for installation.
3. Check the O-ring (3) and replace it if necessary.
4. Remove the lower resonance flap (5).
5. Replace the gasket (6).
6. Installation should follow the removal procedure in the
reverse order.
M162 ENGINE INTAKE & EXHAUST 1G1-7
4 Vacuum Hose
5 Resonance Flap
6 Gasket ................................................... Replace