SSANGYONG 1999 Musso Service Manual page 326

1B3-24 OM600 ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the nut.
Installation Notice
Tightening Torque
2. Push the tensioning lever in direction of arrow with a rod
( F12 ´ 180mm ) and push out the bolt to the rear.
3. Push back the tensioning lever to release the spring tension
and remove the belt.
4. Remove the bolt (9) and then remove the belt pulley (8).
5. Remove the bolt (1, 18) and take off the damper (2).
Notice
Pay attention to installation position of the damper.
10 Nm