Self Diagnosis Test; Diagnosis Test - SSANGYONG 1999 Musso Service Manual

2A-12 SUSPENSION DIAGNOSIS

DIAGNOSIS TEST

Special Tool Requirements : Scanner
1. Position the ignition switch to 'OFF'.
2. Connect Scanner harness connector to the engine
compartment diagnosis socket.
3. Turn the ignition switch to 'ON' position.
4. Select "Electronic control vehicle diagnosis" from function
selection display and press "Enter".
5. Select "Musso ('98 model year)" from vehicle model selection
display and press 'Enter'.
6. Select "Electronic suspension system (ECS)" from control
system selection display and press 'Enter'.
7. Select "Self-diagnosis" from diagnosis item selection display.
Notice
Check sensor value output display, if necessary.
8. Determine the fault code and check defective component.
Notice
Refer to self-diagnosis list.

SELF DIAGNOSIS TEST