SSANGYONG 1999 Musso Service Manual page 315

Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
3. Remove the skid plate.
Installation Notice
Tightening Torque
4. Remove the radiator drain cock and drain the coolant.
Notice
Open the coolant reservoir tank cap.
5. Remove the drain plug (1) and seal (2) from the cylinder
block and drain the coolant completely.
6. After draining, replace the seal and reinstall the drain plug.
Installation Notice
Tightening Torque
7. Disconnect the lower coolant hose from the radiator.
OM600 ENGINE MECHANICAL 1B3-13
28 - 47 Nm
30 Nm