Thermostat - SSANGYONG 1999 Musso Service Manual

THERMOSTAT

1 Bolt (M6 X 25, 3 pieces) ........................ 9 -11 Nm
2 Thermostat Cover
3 De-aeration Hose
Removal & Installation Procedure
1. Drain the coolant from the radiator.
2. Loosen the hose mounting clip and remove the coolant hose
(3, 4).
3. Unscrew the three bolts (1) and remove the thermostat cover
assembly from thermostat housing.
Installation Notice
Tightening Torque
Do not separate the thermostat cover and thermostat.
4. Replace the O-ring if necessary.
5. Check the leakage in the cooling system.
4 Coolant Outlet Hose
5 Thermostat
6 O-ring
9 - 11 Nm
M161 ENGINE COOLING 1D2-11