SSANGYONG 1999 Musso Service Manual page 413

6. Remove the spring retainer(3) and spring (4).
7. Check the valve spring and replace if necessary.
8. Insert valve spring (4) with the color coding (arrow) facing
down and insert valve spring Retainer(3).
9. By press the spring retainer(3) with press lever (90), install
the valve cotters with magnetic finger (10).
10. Remove the supporting bar.
11. Remove the holding wheel (7) from the timing chain (5).
13. Coat the valve tappet with oil and install it.
Press Lever 667 589 00 31 00
Magnetic Finger 116 589 06 63 00
Holding Wheel 603 589 01 40 00
Magnetic Bar 102 589 03 40 00
OM600 ENGINE MECHANICAL 1B3-111