SSANGYONG 1999 Musso Service Manual page 621

Removal & Installation Procedure
1. Discharge the fuel pressure from the fuel pressure test
connector.
2. Disconnect the battery ground cable.
3. Disconnect the vacuum hose from the fuel pressure
regulator.
4. Remove the cable guide.
5. Remove the fuel return and supply line.
Notice
For removal, cover around parts with cloths not to be
stained by fuel.
In case of checking the injector only, do not remove the
fuel return and supply line.
Installation Notice
Tightening Torque
6. Remove the six injector connectors.
7. Remove the two left and two right bolts and one center bolt
of the fuel distributor assembly from the intake manifold.
Installation Notice
Tightening Torque
25 - 30 Nm
22.5 - 27.5 Nm
M162 ENGINE CONTROLS 1F1-51