CAMSHAFT SPROCKET BOLT
Intake Flange Shaft Bolt
Tightening Torque
Notice
The sprocket bolts are designed to be used only once, so
always replace with new one.
Exhaust Camshaft Sprocket Bolt
Tightening Torque
Notice
The sprocket bolts are designed to be used only once, so
always replace with new one.
1st step 20 Nm
2nd step + 90°
C. M7 x 13 Collar Bolt Torx-T30
e. 6.8 mm
16. Flange Shaft
18. Control Piston
22. Intake Camshaft
1st step 20 Nm
2nd step + 90°
E. M7 x 13 Collar Bolt Torx-T30
e. 6.8 mm
13a. Camshaft Sprocket
22a. Exhaust Camshaft
M161 ENGINE MECHANICAL 1B2-65