SSANGYONG 1999 Musso Service Manual page 842

Removal & Installation Procedure
1. Remove the connecting nuts (1) from stabilizer bar link.
Installation Notice
Tightening Torque
2. Remove the connecting nuts (2) of the stabilizer bar and
link and then remove the link.
Installation Notice
Tightening Torque
3. Remove the stabilizer bar fixing cap bolts (arrow) and
remove the stabilizer bar.
Tightening Torque
4. Installation should follow the removal precedure in the
reverse order.
Notice
The distance between the end of the nut and the end of the
link should be in 10-13 mm at the connection of the stabilizer
bar link and lower arm.
16 - 22 Nm
60 - 80 Nm
30 - 45 Nm
FRONT SUSPENSION 2C-5