SSANGYONG 1999 Musso Service Manual page 943

UNIT REPAIR
FRONT DISC BRAKE
Inspection Procedure
1. Clean all components and visually check the followings.
Check the cylinder and piston for wear, rust or damage.
Check the caliper body and guide pin for wear, damage
or crank.
Check the pads for uneven wear or oiliness.
Check the boots for damage or tear.
2. Measure caliper housing inner diameter.
Item
With PBR
With MANDO
3. Measure pad thickness.
Standard
10 mm
Notice
Always change the all pads on one wheel at a time.
4. Measure rotor disc thickness.
Standard
24 mm
5. Check the rotor disc for score or runout.
Standard
Wear Limit
f 60.4 mm
f 61.4 mm
f 60.0 mm f 61.0 mm
Wear Limit
2.0 mm
Wear Limit
22 mm
FRONT DISC BRAKES 4D-5