1B2-112 M161 ENGINE MECHANICAL
CYLINDER HEAD MATING SURFACE
Preceding Work : Removal of valves
Service Data Standard
Overall Height of Cylinder Head
Minimum Height After Machining
Flatness
Distance 'T'
(Between Camshaft Bearing
and Valve Stem)
Notice
Do not exceed 0.4mm for the milling of the mating surface of crankcase and cylinder head.
Axial Direction
Transverse Direction
Standard Size
Repair Size
135.9 - 136.0 mm
24.21 - 24.75 mm
Intake
Exhaust
22.21 - 22.75 mm
23.96 - 24.51 mm
Intake
Exhaust
21.96 - 22.51 mm
135.5 mm
0.08 mm
0.0 mm