SSANGYONG 1999 Musso Service Manual page 699

1F2-50 M161 ENGINE CONTROLS
Removal & Installation Procedure
1. Discharge the fuel pressure from the fuel pressure test
connector by pushing service valve (arrow).
2. Disconnect the battery ground cable.
3. Disconnect the vacuum hose from the fuel pressure
regulator.
4. Disconnect the cable from ignition coil.
5. Remove the fuel return and supply line.
Installation Notice
Tightening Torque
Notice
For removal, cover around parts with cloths not to
bestained by fuel.
In case of checking the injector only, do not remove the
fuel return and supply line.
6. Remove the four injector connectors (arrows).
7. Unscrew the two combination bolts (8).
Installation Notice
Tightening Torque
22.5 - 27.5 Nm
22.5 - 27.5 Nm