SSANGYONG 1999 Musso Service Manual page 199

1B2-10 M161 ENGINE MECHANICAL
Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
3. Remove the under cover.
Installation Notice
Tightening Torque
4. Disconnect the coupling of HFM sensor and remove the air
cleaner cross pipe.
5. Remove the air cleaner cover. Remove the mounting bolts
and air cleaner housing and element assembly.
6. Loosen the radiator drain cock and drain the coolant.
Notice
Open the coolant reservoir cap.
28 - 47 Nm