SSANGYONG 1999 Musso Service Manual page 536

Removal & Installation Procedure
Cooling Fan Shroud
1. Remove the radiator deaeration hose and tube.
Installation Notice
Tightening Torque
Tightening torque 3-7Nm
2. Check the shroud.
3. Installation should follow the removal procedure in the
reverse order.
Coolant Sub-Tank
1. Drain the coolant from radiator.
2. Remove the each hose.
3. Loosen the mounting bolt of sub-tank and remove the
coolant sub-tank.
Installation Notice
Tightening Torque
4. Installation should follow the removal procedure in the
reverse order.
3 - 7 Nm
3 - 7 Nm
OM600 ENGINE COOLING 1D3-15