Maintenance And Repair; On-Vehicle Service; Coolant Drain And Fill Up - SSANGYONG 1999 Musso Service Manual

COOLANT DRAIN AND FILL UP

Draning & Filling up Procedure
1. Loosen the cap a little and release pressure and remove
the cap.
Notice
For the risk of scalding, the cap must not be opened unless
the coolant temperature is below 90
2. Loosen the radiator lower drain cock and drain the coolant.
Notice
Collect coolant by using a proper container.
3. Drain the coolant from the crankcase by inserting a hose
(dia. 14mm) onto the drain bolt on the side of crankcase
(exhaust manifold) and by loosening the plug.
Notice
Just loosen the drain plug to drain the coolant and do
not remove the plug completely.
Collect coolant by using proper container.
4. After complete draining of the coolant, remove the hose
connector to drain plug and reinstall the drain plug.
Installation Notice
Tightening Torque
5. Tighten the radiator lower drain cock.

MAINTENANCE AND REPAIR

ON-VEHICLE SERVICE

o
C.
30 Nm
M162 ENGINE COOLING 1D1-5