Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 522

15 Problem Solving
Error Code
016-786 [Cause]
[Remedy] Take one of the following measures:
016-788 [Cause]
[Remedy] Take one of the following measures, and then execute the operation again:
016-790
[Cause]
[Remedy] Take one of the following measures:
For more information on [Quality/File Size], refer to "5 Scan" > "E-mail Options/Filing Options" > "Quality/File Size
(Specifying an Image Compression Ratio When Scanning)" in the User Guide. For more information on [Maximum Split
Count], refer to "Maximum Split Count" (P.276).
016-792
[Cause]
[Remedy] The specified job history does not exist.
016-794 [Cause]
[Remedy] Check whether the media is inserted correctly.
016-795 [Cause]
016-796
[Remedy] On a computer, confirm the content recorded on the media.
016-797
016-798 [Cause]
[Remedy] Install the hard disk, and try printing again.
016-799 [Cause]
[Remedy] Check the print data of the application and the Print Setup settings, and try printing
15
017-700 [Cause]
[Remedy] Confirm the connection to the ThinPrint.Engine.
017-701
[Cause]
[Remedy] Confirm the connection to the ThinPrint.Engine.
017-702 [Cause]
[Remedy] Confirm the connection to the ThinPrint.Engine.
522
Cause and Remedy
When using the Scan feature, the machine could not write the file to the hard disk.

Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power.

Load paper on the paper tray as necessary.

If the error occurs when sending an e-mail, take one of the following measures:
- Lower the resolution.
- Reduce the size.
- Reduce the number of pages, and divide the job into several e-mails to send.
- Send the job by setting [Color Scanning] to [Black & White].
Failed to retrieve a file from the Web browser.

Reload the browser page.

Restart the browser.

Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power.
Unable to send an e-mail with Split Send because of exceeding the maximum number
of splits allowed.

Reduce the file size for [Quality/File Size].

Increase the value for [Maximum Split Count].
Failed to acquire the specified job history when printing a Job Report.
Media is not inserted correctly.
An error occurred when reading the data on the media.
Unable to print a document because the hard disk is not installed.
Contact our Customer Support Center.
An invalid print parameter is included in the print data of the application, or the print
data and the Print Setup settings may not match.
again.
ThinPrint.Engine connection timed out.
An error occurred while connecting to ThinPrint.Engine.
The data sent to ThinPrint.Engine is invalid.