Changing The Paper Settings - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

2 Paper and Other Media

Changing the Paper Settings

This section describes how to change the paper type for Trays and how to set image quality
processing by the individual paper type.
After loading paper in a tray, specify the type of paper loaded and select image quality for
the paper type. Setting image quality for each paper type enables you to print with the most
suitable image quality for the paper type.
For information on image quality processing for each paper type, refer to "Image Quality" (P.170).
Note
1
Press the <Log In/Out> button.
2
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note
3
Select [Tools] on the Services Home screen.
Note
4
Select [System Settings] > [Common Service
Settings] > [Paper Tray Settings].
72
• Users can name Custom 1 to Custom 5 displayed in the paper type settings. For information on how
to set names to Custom 1 to Custom 5, refer to "Custom Paper Name/Color" (P.167).
• You can change the paper type setting without entering to the System Administration mode on the
[Setup] screen, which is displayed by selecting [Setup] in the Services Home screen if you configure
the settings in advance. For more information, refer to "Customize Paper Supply Screen" (P.168).
• The default user ID is "11111".
• The default passcode is "x-admin".
• When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
<Log In/Out> button