Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 446

14 Authentication and Accounting Features
7
Select [Login to Remote Accounts], and then select [Save].
For more information on the authentication method, refer to "Login Type" (P.323).
8
Select [Yes].
9
Select [Access Control].
10
Select [Service Access].
11
Select [Unlocked] for the required services to permit users unlimited access, and then select
[Save].
12
Select [Close] repeatedly until the [Tools] screen is displayed.
13
Select [System Settings].
14
Select [Connectivity & Network Setup].
15
Select [Remote Authentication/Directory Service].
16
Select [Authentication System Setup] > [Authentication System], and then select a remote
authentication server.
For more information, refer to "Remote Authentication/Directory Service" (P.231)
Note
17
Configure the settings for the remote authentication server.
For more information on the Authentication feature, refer to "Kerberos Server Settings (ApeosPort Series Models Only)"
(P.231), "LDAP Server/Directory Service Settings (ApeosPort Series Models Only)" (P.232), and "SMB Server Settings" (P.236).
18
Select [Close] repeatedly until the [Tools] screen is displayed.
19
Select [Close].
Note
 When an LDAP server is used as a remote authentication server
Set the user authorization on the LDAP server using the following steps.
14
1
Start CentreWare Internet Services.
2
Click the [Properties] tab.
3
Click [Connectivity] > [Protocols] > [LDAP] > [LDAP Authorization Access].
4
Set attributes in [System Administrator Access] and [Accounting Administrator Access].
Setting example:
System Administrator Access: CN=SA, CN=Users, DC=secEQ, DC=local
Accounting Administrator Access: CN=AA, CN=Users, DC=secEQ, DC=local
5
Click [Apply].
446
• The available options are [Kerberos (Windows 2000)], [Kerberos (Solaris)], [LDAP], [SMB], and
[Authentication Agent].
• To use ApeosWare Authentication Management as a remote server, select [Authentication Agent].
• Rebooting the machine may be required depending on the settings. When a message displayed on
the screen, follow the message and reboot the machine.
• The machine enters the Login mode, and [Login] is displayed at the lower left of the Services Home
screen.
• When [Locked (Show Icon)] is selected for a service under [Service Access], [ ] is displayed on the
button of the applicable service on the Services Home screen. Also, [ : Requires Login] is displayed
at the lower left of the Services Home screen. [ ] and [ : Requires Login] are not displayed after
authentication.
• When [Locked (Hide Icon)] is selected for a service under [Service Access] the applicable service is
not displayed on the Services Home screen. The services is displayed after authentication.