Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 234

5 Tools
 Network User ID Attribute (ApeosPort Series Models Only)
When a smart card is used for LDAP authentication, set the attribute of the user name to be
used for a smart card ID search. The user name is given to the remote service as the
authentication information. Up to 32 characters are allowed.
Note
 Login Credentials to Search Entries
Select which users are allowed to search the Address Book.
You can select from [Remotely Authenticated User] and [System].
 Login Name
Set a user name for the Address Book search and access to the directory server using
[Authentication of User Attributes] method for LDAP authentication. Set this item only
when authentication is required for the search for the directory service. Up to 255 characters
are allowed.
 Password
Set a login password for the user specified in [Login Name]. Up to 32 characters are allowed.
 Search Directory Root
Enter a search root character string with up to 255 characters.
5
 Scope of Search from Root Entry
Select the search range from the root entry.
 Root entry only
- Searches the root level only.
One level below root entry only

- Searches from the root level to one level below the root level.
 All levels below root entry
- Searches from the root level to all lower levels below the root level.
 Object Class of Search Target
Enter the object class to search with up to 32 characters.
 LDAP Referrals
Specify whether or not to re-establish connection to another LDAP server if a currently
connected LDAP server requests to do so.
 LDAP Referral Hop Limit
When using the Referral feature, specify how many times that a user is allowed to hop
servers within 1 to 5 times.
 LDAP Server
Select the software used by the directory server from [Microsoft Active Directory], [Microsoft
Exchange], [IBM Lotus Domino 6.*], and [Other Applications].
 Search Entries by Common Name
Set whether or not to use [Attribute Type of Name] as a search entry when a name is used
as a search key.
234
• This item is displayed when [Smart Card Link Mode] under [Tools] > [Authentication/Security
Settings] > [Authentication] > [User Details Setup] is set to [No Passcode Required].