Print Overview - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

7 Printer Environment Settings

Print Overview

This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable or a parallel interface cable. Similarly, it can be set up
as a network printer by connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
Note
7
Using the Machine as a Local Printer
 Parallel
Use a parallel interface cable to directly connect the machine to a computer. The Parallel
Port Kit (optional) is required.
For more information on how to set up the machine using parallel connection, refer to "Installation When Using Parallel
Port" (P.346).
 USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation When Using USB Port"
(P.349).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to connect
the machine.
 LPD
Use LPD when direct communication between the machine and a computer via TCP/IP is
available.
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/IP (LPD/Port 9100)"
(P.351).
344
Via Internet
IPP
Network connection
LPD/Port9100
Server
• The print drivers are contained in the Media (Software/Product Manual). For information on the
driver installation procedures, refer to the manual contained in the Media (Software/Product
Manual).
• You can download the latest print driver from our web site.
Local connection
Parallel/USB