Table of Contents
Advertisement
Error Code
116-388
[Cause]
The optional hard disk is not installed.
[Remedy] Install the hard disk. Contact our Customer Support Center.
116-389
[Cause]
The Extension System Memory is not installed.
[Remedy] Install the Extension System Memory. Contact our Customer Support Center.
116-390
[Cause]
An error occurred in the machine.
[Remedy] Follow the message displayed on the touch screen and initialize the memory of the
machine.
116-391
[Cause]
An error occurred in the machine.
116-392
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-393
on the machine power. If the same message is displayed again, contact our Customer
116-394
Support Center.
116-395
116-396
116-397
116-399
116-700
[Cause]
Memory is insufficient for Image Extension Kit (optional).
[Remedy] Select Standard for the image quality.
116-701
[Cause]
Unable to use the 2 Sided Printing feature because of insufficient memory.
[Remedy] Increase memory, or install the hard disk if it is not installed.
116-702
[Cause]
A print job was processed using a substitute font.
[Remedy] Check the print data.
116-703
[Cause]
Probable causes are as follows:
1)An error occurred during Post Script (optional) processing.
2)An error occurred because of insufficient memory.
3)An error occurred because of insufficient memory for PostScript processing.
[Remedy] For 1), check the print data.
For 2), increase memory.
For 3), increase the value for [PostScript Memory].
116-704
[Cause]
An error occurred when reading data on the media.
[Remedy] Check whether the media is inserted correctly.
116-705
[Cause]
An error occurred when reading data on the media.
116-706
[Remedy] Use a computer to confirm the content recorded on the media.
116-707
116-708
116-709
116-710
[Cause]
The correct document size could not be judged because the receive data exceeded the
HP-GL/2 spool size.
[Remedy] Increase the size assigned to HP-GL/2 auto layout memory.
116-711
[Cause]
The size and orientation of the form specified are not matched with the paper to be
printed.
[Remedy] Match the size and orientation of the paper with the form specified, and print again.
116-713
[Cause]
The data has been divided into a number of jobs because of insufficient disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
Cause and Remedy
Error Code
15
593
Advertisement
Chapters
Table of Contents
