Reduce/Enlarge Presets; Original Size Defaults; Local Terminal Information - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

Hide thumbs Also See for ApeosPort-V C6676:

Table of Contents

Output Destination Setup

In [Output Destination Setup], you can set the output destination for each receiving line.

 Fax Received - Line 1 to 3

Specify output tray for each line.

 Fax Received - SIP

Specify output tray for IP fax (SIP).

 Public Folder Printed Files

Specifies output tray for public folder for polling.

Reduce/Enlarge Presets

You can set the magnifications displayed as [Preset %] which are displayed under [Reduce/

Enlarge] in the [Layout Adjustment] screen. You can assign any magnification to the

Reduce/Enlarge Preset buttons other than [100%] and [Auto %].

You can select a ratio from preset ratios.

 Variable %

You can specify a magnification from 50 to 400% in 1% increments.

You can set the original sizes displayed in [Original Size] in the [Layout Adjustment] screen.

You can assign original sizes to the buttons other than [Auto Detect].

If you frequently use non-standard size paper for scanning, setting non-standard size as the

default will save your time to specify the size each time.

 A/B Series Size

You can select a size from A and B series sizes such as A4 and B5.

You can select a size from Inch series sizes such as 8.5 x 11" and 11 x 17".

You can select a size from other sizes such as photo and postcard.

You can set the local terminal information, including a local name and company logo.

• This feature does not appear for some models. An optional component is required. For more

information, contact our Customer Support Center.

• The displayed items may vary depending on the options installed.

• There are a maximum of three lines that can be used for G3 communications: line 1, line 2, and line

• You can set a company logo, G3 ID (fax number), G3 dial type, and G3 line type.

Fax Service Settings

Table of Contents