Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 55

Paper Name Size
P801 A4
Universal A4
Transparency Plain
115MIC
V510 A4
*1 : Select the paper type setting for the paper loaded on a tray. For more information, refer to "Changing the Paper Settings"
(P.72).
*2 : Most ideal image quality with the paper can be obtained by setting the image quality for each type of paper. For more
information on the settings, refer to "Image Quality" (P.170).
Note
Limited Paper
You can use the following paper with limitations:
Paper Name Size
Colotech + A4
Colotech + A3
Colotech + A4
Colotech + A3
Colotech + A4
Colotech + A3
Paper
Basis Weight
(gsm)
Type
Unknown Trans-
parency
Unknown Trans-
parency
Unknown Trans-
parency
• For more information on special media such as other heavyweight paper, contact our Customer
Support Center.
Paper
Basis Weight
(gsm)
Type
200 Extra-HW
200 Extra-HW
250 Extra-HW
250 Extra-HW
280 X-HW Plus
280 X-HW Plus
Image
*1 *2
Quality
-


-

-


Image
*1 *2
Quality
Extra-HW A

Extra-HW A 
Extra-HW B

Extra-HW B



Extra-HW A


Extra-HW A


Paper Types
Notes / Countermeasure
The paper is charged with
static electricity after a copy or
print job.
When using Tray 5, insert
another type of paper at the
bottom of the stack before
loading transparencies.
If two or more sheets of
transparencies are being fed
simultaneously (double-feed),
load one sheet at a time.
Transfer deterioration might
be occurred when copying or
printing in color. Also, toner
may spatter on color images in
prints.
When using Tray 5, insert
another type of paper at the
bottom of the stack before
loading transparencies.
Notes / Countermeasure
Load paper with the curl side
up in Tray 5.
Load paper with the curl side
up in Tray 5.
Images may be degraded.
Images may be degraded.
It is recommended to load
paper in portrait orientation. If
it is not possible, use Tray 5.
If paper jam occurs, use Tray 5.
It is recommended to load
paper in portrait orientation. If
it is not possible, use Tray 5.
If paper jam occurs, use Tray 5.
It is recommended to load
paper in portrait orientation. If
it is not possible, use Tray 5.
If paper jam occurs, use Tray 5.
2
55