Executing 2 Sided Color Scanning Calibration - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

3 Maintenance

Executing 2 Sided Color Scanning Calibration

This section describes the procedures to adjust scan colors for side 1 and side 2 of the duplex
automatic document feeder.
Important • For the correct output result, execute the calibration in advance. For the calibration, refer to
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
3
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note
3
Select [Tools] on the Services Home screen.
Note
4
Select [System Settings] > [Common Service
Settings] > [Image Quality Adjustment].
5
Select [2 Sided Color Scanning Calibration].
6
Select [Paper Supply] and set the paper tray. Select [Print Chart] and then [Start].
110
"Executing Calibration" (P.107).
• The default user ID is "11111".
• The default passcode is "x-admin".
• When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
<Log In/Out> button