Notes And Restrictions On The Use Of The Scan Features - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

 ThinPrint
 To install "ThinPrint .print" to Windows Server 2003 or Windows Server 2008, a ".print
Application Server Engine" license is required.
ThinPrint can operate in an IPv4 environment, but not in an IPv6 environment.

 Up to three can be connected simultaneously. The fourth or above connection requests
are stored in the queue. Up to 10 connection requests can be stored in the queue. If
exceeding 10, another connection request is no longer received. After preceding
connections are terminated, the connection requests in the queue will be processed
subsequently when the total number of the connections becomes less than four.
 Functions to control jobs, such as canceling or suspending jobs, are not provided. Instead,
you can cancel a job on the [Job Status] screen from the control panel, or from
CentreWare Internet Services.
 The machine prints jobs in the order in which they are spooled. The jobs may not be
printed in the order in which the job requests are received by the machine.
 If the power is switched off, this feature can store the order of jobs spooled and their data.
If the power switched off while a job is being received, the job is deleted.
 Paper Orientation when Printing Mixed Size Originals
 The combinations available for printing mixed size originals from the print driver are the
followings: A4 and A3, B5 and B4, 8.5 x 11" (Letter) and 11 x 17" (Tabloid), 16K and 8K.
 The document orientation (portrait or landscape) may not be determined correctly
depending on the application being used. In this case, the output may have a different
orientation from the document orientation, depending on the combination of the mixed
size originals.
The output may have a different orientation from the original orientation when a

document stored in a folder is printed.
 Direct Fax Driver
The direct fax driver does not support Envelope (90 x 205 mm), Envelope (162 × 229 mm),
Envelope (229 × 324 mm), and Envelope (235 × 120 mm).
 Printing via lpr Port
When a print job is sent via the lpr port, the characters of user name, file name, or host name
may be garbled and displayed incorrectly on the screen during printing, the job confirmation
screen, or the Job History Report.
To prevent character garbling, use a port other than lpr.
 When Using the Authentication Feature on the machine
When you set the authentication information on the print driver, set the User ID up to 32
single-byte characters (16 double-byte characters). If you set the User ID using 17 double-
byte characters or more, an authentication error occurs so that you cannot start printing.

Notes and Restrictions on the Use of the Scan Features

This section describes notes and restrictions to observe when using the Scan features.
For the notes and restrictions on Network Scan Driver and Stored File Manager 3, refer to the Readme contained in the
Media (Software/Product Manual).
Notes and Restrictions
733
16