Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 686

16 Appendix
Setting Item
2 Sided printing
Font
Print control
ESCP switch
16
686
Item Number
12 Sets the 2 sided printing.
[0] (Default) : Off
[1]
[2]
Important • When [Postcard] is selected for [Paper Size], [Head to Head] and [Head to
14 Sets the font for single-byte characters.
(Alphanumeric [0] (Default) : Roman
fonts) [1]
Important • Since this feature selects the default value, its setting will not be affected
51 Sets whether to print blank pages if included in the document.
(Blank sheet [0] (Default) : Off
output) [1]
Note
52 Extends the position of the right margin.
(Character [0] (Default) : Standard
print area) [1]
Important • Changing the character print area from [Extended] to [Standard] restores
53 Sets whether or not to enable the Image Enhancement feature.
(Image Image Enhancement smoothens the border between black and white,
enhancement) reducing rough edges, and thus seemingly increasing the resolution.
[0]
[1] (Default) : On
55 Sets the Text Quality mode to high quality or draft.
(Text quality) [0] (Default) : High Quality
[1]
Important • Since the default value is selected for the [Text Quality], [Reduced
Note
56 Reduces the size of single-byte alphanumeric characters when printing. Sets
(Reduced whether to reduce their sizes or to print them at a scale of 100%.
characters) [0] (Default) : Off
[1]
58 Sets the length of a page (printable area) to 11 inches or 12 inches.
(Page length) [0] (Default) : 11 inches
[1]
59 Sets whether or not to leave a 1-inch space between pages.
(1-Inch [0] (Default) : Off
perforation [1]
skip)
Important • This is effective only when CSF under [Paper Position] is set to [Off].
Value
: Head to Head
: Head to Toe
Toe] cannot be selected.
: Sanserif
when an extended command is received.
: On
• Even when [Off] is selected, blank pages are printed if they are spaces
created with user-defined characters or images in white color.
• When [Off] is selected for this feature and 2 Up or 2 sided printing is
specified, blank pages are not printed.
: Extended
the left and right margins to the default values.
• When the position of the right margin is set here, that position becomes
the right edge of the character print area.
: Off
: Draft
Characters], [Character Code Table], [Page Length], and [1-inch
Perforation Skip] features, their settings will not be affected when an
extended command is received.
• Changing settings does not change actual printing quality.
• This setting affect the Text Quality selection commands. For more
information on the Text Quality selection commands, contact our
Customer Support Center.
: On
: 12 inches
: On