Other Settings - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

5 Tools
 Description
Enter the description of the access destination with up to 128 single-byte characters.
 Use User ID
 No
- When [Login Type] is set to [Login to Remote Accounts]:
- When [Login Type] is set to [No Login Required] or [Login to Local Accounts]:
 Yes
Allows you to enter a user ID and password into [User ID] and [Password] respectively,
which are used when the machine accesses the remote service.
 User ID
Enter the user ID to access the remote service with up to 128 characters.
Important • Depending on the settings on the remote service, the entry for [User ID] may be invalid. Check the
Note
5
 Password
Enter the password for the user ID with up to 128 characters.
 Machine/Authentication Notification
Set whether or not to notify the remote server of machine information and user
authentication information every time the machine connects to the remote service.
Note
 Notify User Authorization Information
Set whether or not to notify the remote service of user authorization information every time
the machine connects to the remote service.
 Delete All Settings
Deletes all settings registered.
 Functional Code
Set the functional code as necessary when you use a service which works in ApeosPort.
Specify the value between 0 and 65535.

Other Settings

When Sending User Details
Set whether or not to display a confirmation screen when the machine send user
authorization information (authorized user ID, password, e-mail address, and the services
restricted) to the remote server.
Note
288
The machine accesses the remote service using the user information authenticated on
the machine.
The machine prompts the user to input user ID and password to access Web
applications.
settings on the remote service.
• Along with [User ID], set also [Password]. [User ID] will be invalid unless [Password] is set.
• All the specified settings are ignored if the remote service to be connected requires other than a user
ID and its password for authentication.
• The remote service determines whether to use the information. No need to configure settings on the
control panel.
• Even when you select [No Confirmation Required], if there is a flaw in the authentication
information, a confirmation screen is displayed.