Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 508

15 Problem Solving
Error Code
016-508 [Cause]
[Remedy] Set the forwarding rule for image logs from the server to the machine.
016-509
[Cause]
[Remedy] Either set the forwarding rule for image logs from the server to the machine, or set
016-510 [Cause]
[Remedy] Set the forwarding rule for image logs from the server to the machine.
016-511 [Cause]
016-512
[Remedy] Confirm the forwarding rule for image logs from the server to the machine.
016-513 [Cause]
[Remedy] For 1), wait for a while, and then execute the operation again.
016-514
[Cause]
[Remedy] If an error occurred while printing from a driver which supports XPS, print from the
Note
016-515 [Cause]
[Remedy] Take one of the following measures:
Note
For more information on [Image Options], refer to the help of the print driver.
016-516 [Cause]
15 [Remedy] Check whether there is a problem with the method of using the application that sent the
Note
016-517 [Cause]
[Remedy] Print with the PostScript driver. Furthermore, modify ProcessColorModel described in the
508
Cause and Remedy
When using the Image Log Control feature, failed to forward the image log to the
server.
When using the Image Log Control feature, failed to forward the image log to the server
because the forwarding rule for image logs from the server to the machine has not been
set.
[Transfer Image Log] to [Disabled].
When using the Image Log Control feature, failed to forward the image log to the server
because the forwarding rule for image logs from the server to the machine has not been
set.
When using the Image Log Control feature, failed to forward the image log to the server
because the forwarding rule for image logs from the server to the machine has not been
set correctly.
An error occurred in connecting to the SMTP server. Probable causes are as follows:
1)The SMTP server or network may be overloaded.
2)The source port number for SMTP is incorrect.
For 2), confirm whether the source port number for SMTP is correct.
An error occurred during processing of an XPS document.
application using another print driver (PCL, etc.).
If an error occurred while direct printing an XPS document (such as ContentsBridge
Utility, E-mail, and Media Print - Text), print using the print driver (PCL, etc.) from XPS
Document Viewer.
• XPS stands for XML Paper Specification.
There was insufficient memory during processing of an XPS document.

Set [Image Quality] to [Standard]

Increase the amount of memory

Print using the print driver (PCL, etc.) from XPS Document Viewer.
• XPS stands for XML Paper Specification.
The Print Ticket included in the XPS document includes an invalid description or a print
setting not supported by the machine.
print job, or with the content of the print instruction.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application, not with Fuji
Xerox.
If the error still is not resolved, contact our Customer Support Center.
• XPS stands for XML Paper Specification.
There is an error in the content described in the PostScript file.
PostScript file so that the color mode does not change.