Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 560

15 Problem Solving
Error Code
026-718 [Cause]
[Remedy] Confirm the print data, and try printing again.
026-719 [Cause]
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
026-720
[Cause]
[Remedy] Confirm the amount of available space.
026-721 [Cause]
[Remedy] Check the following conditions:
026-722
[Cause]
[Remedy] Initialize the USB memory device on a computer with the following file format, and then
Note
026-723 [Cause]
[Remedy] 1)Check that the medium is not inserted or removed, or the other medium is not
026-724 [Cause]
026-725
[Remedy] Contact our Customer Support Center.
026-726 [Cause]
[Remedy] Modify the machine configuration information in the print driver screen to match the
026-727 [Cause]
[Remedy] Take one of the following measures:
15
026-730 [Cause]
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
026-736 [Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
560
Cause and Remedy
Incompatible print parameters are used. The combination of the specified features such
as Document Size, Paper Size, Paper Tray, 2 sided printing, and Output Tray is
incompatible.
An error occurred while operating the Store to USB service.
our Customer Support Center.
The capacity of the USB memory device of the recipient is insufficient while performing
the Store to USB service.
An error occurred while operating the Store to USB service.

The USB memory device is inserted into the USB memory slot.

The USB memory device is accessible from your computer.

The unencrypted USB memory device is used.
The USB memory device is not initialized.
execute the operation again.

Supported file formats: FAT12, FAT16 (FAT), FAT32
• NTFS is not supported.
• A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact our Customer Support Center.
The machine failed to access to the medium.
inserted, while the machine is referencing the medium.
2)Check that the file in the medium can be accessed via a computer.
An error occurred while connecting to the EP system via the Internet.
The machine configuration information at a print job specification does not match the
actual machine configuration.
actual machine configuration.
Probable causes are as follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
number of characters available.
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
The size of paper loaded in the specified tray is unknown.
An internal error occurred while sending the scanned document to the HTTP server.
Support Center.