Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 571

Error Code
027-763 [Cause] The machine failed to verify the user information against the remote accounting server.
[Remedy] Take one of the following measures:




027-764
[Cause] An error occurred in the communication with the AirPrint Scan client, or the client
canceled the job.
[Remedy] Check the network communication with the AirPrint Scan client by checking the
following.


027-770 [Cause] The print job has a problem.
[Remedy] Submit the print job again.
027-771
[Cause] The hard disk of the server connected to the machine is full.
[Remedy] Delete unnecessary data from the server.
027-772 [Cause] An error occurred during communication with the SMTP server.
[Remedy] Use ASCII characters to modify the host name that has been specified under [Tools] >
[Connectivity & Network Setup] > [Machine's E-mail Address/Host Name]. If the error
still is not resolved, confirm with your network administrator whether the SMTP server
supports the HELO command.
027-773 [Cause] An error occurred during communication with the SMTP server.
[Remedy] Wait for a while, and then execute the operation again.
027-774
[Cause] The specified e-mail address contains unsupported characters.
[Remedy] Specify the e-mail address using only ASCII characters.
027-775 [Cause] Too many destination addresses have been specified.
[Remedy] Reduce the number of destination addresses. If the error still is not resolved, confirm
with your network administrator whether the SMTP server supports the EHLO command.
027-776
[Cause] An error occurred during communication with the SMTP server.
[Remedy] Use ASCII characters to modify the host name that has been specified under [Tools] >
[Connectivity & Network Setup] > [Machine's E-mail Address/Host Name]. If the error
still is not resolved, confirm with your network administrator whether the SMTP server
supports the EHLO command.
027-777 [Cause] The destination SMTP server does not support SMTP-AUTH.
[Remedy] Set [E-mail Send Authentication] to [Off] under [Tools] > [Connectivity & Network
Setup] > [Outgoing/Incoming E-mail Settings] > [SMTP Server Settings].
027-778 [Cause] The destination SMTP server does not support the SMTP-AUTH system set on the
machine.
[Remedy] Confirm the authentication type supported by the SMTP server with your network
administrator. The machine supports the following authentication types: AUTH GSSAPI
(only for Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH PLAIN, AUTH LOGIN, AUTH
CRAM-MD5.
027-779 [Cause] Failed to authenticate the SMTP server.
[Remedy] Confirm the login name and password set to SMTP-AUTH.
Cause and Remedy
Check whether the remote accounting server is operating properly.
Check whether there is no network failure.
Connect the network cable securely.
Confirm the settings on the machine.
Check that the amount of space of the AirPrint Scan client is enough.
Check the connection of the network cable.
Error Code
15
571