Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 521

Error Code
016-776 [Cause] An error occurred during image conversion processing.
[Remedy] For errors occurring when forwarding with Store to Folder or Internet Fax: The image
conversion processing for the part of the data may be completed. Retrieve each
converted page from the folder using CentreWare Internet Services.
For more information, refer to "Configuring Machine Settings Using CentreWare Internet Services" (P.339).
For errors occurring after instructing encryption or signature using a certificate:
Take one of the following measures:


For errors occurring when [Microsoft
Format]: There are too many images in the document. Select [Single File for Each Page]
for [File Format], or select [Picture Object] for [Image Area Format].
016-777 [Cause] A hard disk error occurred during image processing.
[Remedy] The hard disk may be defective. To replace the hard disk, contact our Customer Support
Center.
016-778
[Cause] The conversion processing of the scanned image was interrupted because of
insufficient disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
016-779 [Cause] An error occurred during scanned image conversion processing.
[Remedy] Retry scanning. If using large-size paper such as A3 with [Resolution] set to [600 dpi],
specify [Resolution] to [400 dpi] or lower in [Layout Adjustment]. If the error still is not
resolved, contact our Customer Support Center.
016-780 [Cause] A hard disk error occurred during scanned image conversion processing.
[Remedy] The hard disk may be defective. To replace the hard disk, contact our Customer Support
Center.
016-781 [Cause] Probable causes are as follows:
1)The mail server cannot be found during e-mail sending (TCP/IP session establishment
2)The machine received an SMTP server error from the mail server during e-mail
[Remedy] 1)Take one of the following measures:
2)Enter the host name using ASCII characters.
Cause and Remedy
Check whether the certificate is valid.
Set the correct date and time on the machine.
failed).
sending.
- Check whether the network cables are plugged in securely.
- Check whether the IP address of the SMTP server when an IP address is used for
server specification.
Available ASCII characters are follows:
- alphabets
- numerals
Check whether or not ASCII characters are used in [Tools] > [Connectivity & Network
Setup] > [Machine's E-mail Address/Host Name].
® ®
Word] or [Microsoft Excel
Error Code
®
] is selected for [File
521
15