Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 714

16 Appendix
Parameter
Folding/180
degree rotation
Emulation target
printer
Pen attributes
16
714
Item No.
168 Specify the Z fold half sheet and whether to rotate landscape documents in
180 degrees.
[0] (Default) : None
[1]
[2]
[3]
[4]
[5]
169 Select the machine to emulate.
[0] (Default) : HP750
[1]
800-815 Set the width (thickness of the line) of the 16 pens (No. 00 to 15). You can set
(Pen width) the width from 0.0 to 25.5 mm in 0.1 mm increments. No. 00 denotes Item
(No. 0-No.15) No. 800.
[0] - [255] (Default: 3) : 0 to 25.5 mm
Note • If the image is reduced by concern with the relationship between
• The width of the line gets thick symmetrically with respect to the center of
• If the width is set to 0.0 mm, nothing is plotted.
850-865 Set the line end shape of the 16 pens (No. 00 to 15). No. 00 denotes Item No.
(Line end 850.
shape) [0] (Default) : Cut
(No. 0-No.15) [1]
[2]
[Cut]
[Round]
[Rectangular]
Value
: Z fold half sheet (Right bind/Top bind)
: Z fold half sheet (Left bind/Bottom bind)
: None (180 degrees rotation)
: Z fold half sheet (Right bind/Top bind, 180 degrees rotation)
: Z fold half sheet (Left bind/Bottom bind, 180 degrees rotation)
: FX4036
[Document size] and [Paper size] settings, the pen width is reduced
accordingly to 0.1 mm at the smallest.
the line.
: Round
: Rectangular
: specified coordinate
: specified coordinate
: specified coordinate